Skip to content

Refrigerated trailer loading: how to arrange pallets so you do not block airflow

Plan refrigerated trailer loading with air circulation, the evaporator, body instructions, and product temperature before loading in mind.

Refrigerated trailer loading must be planned according to the instructions for the specific body, not just the number of pallets. Carrier Transicold recommends not blocking the evaporator and not restricting circulation; the orientation of the pallets should allow air to flow to the rear of the compartment, through the load and under it. At the same time, you must maintain unit stability, the ability to secure them, and the access required by the unloading sequence.

In this article

  • The pallet layout must leave a clear route for supply and return air.
  • No-load zones result from the instructions for the specific body.
  • The refrigerated trailer maintains the agreed transport conditions, and the goods must be prepared to the required temperature before loading.
  • Any change in the number, format, or order of pallets requires a re-evaluation of the plan.
  • Before departure, the actual layout, temperature, and record of deviations must be checked.

Why pallet placement affects air circulation

Confirm the permissible loading height and the method of maintaining unobstructed circulation in the instructions for the specific unit and body.

Before choosing a vehicle, compare pallet arrangements in the trailer loading calculator. For further worked examples, see the guide How many pallets fit on a lorry and a standard trailer?.

The documentation for a given body indicates which zones and channels must be left free and whether a specified loading line or the use of a ventilated floor applies. Do not assume that the markings or dimensions of free space in one refrigerated trailer will fit another.

ATP applies to the international transport of certain perishable foodstuffs and the requirements for specialized equipment. As explained by the UNECE ATP Handbook, it does not establish a single temperature for every refrigerated load. The required temperature and the method of preparing the goods must be determined according to the product specification and transport conditions.

Arranging pallets step by step

A safe layout is created before work in the compartment begins. The sequence below helps combine cargo, body, and route requirements into one operational plan.

  1. Prepare the body for loading. Pre-cool the compartment in accordance with the transport requirements and check that the space is ready for work. The refrigerated trailer is used to maintain the agreed transport conditions, not to rapidly cool a warm product. The goods and load units should be prepared to the required temperature in accordance with the goods specification and the transport contract.

  2. Gather shipment data. Take into account the number of pallets, their dimensions, weight, type, load height, and unloading sequence. For a mixed shipment, list the individual formats separately. A pallet with the same outline may have a different design or parameters, so size alone does not replace information about the actual load unit.

  3. Define the zones that must not be blocked. Using the instructions for the specific body, mark the supply air, return air, evaporator working area, channels in the T-floor, and the loading line. These areas are not reserve space for an extra pallet or loose packages.

  4. Plan the loading order. Decide which pallets go in first and where they will be placed. When the route includes several unloading points, access to units to be delivered later must be combined with the need to maintain unobstructed flow. Do not change the order solely to fill a single gap in the compartment.

  5. Load within the designated layout. After positioning each row, check that the pallets have not entered the supply, return, or floor-flow zones. Do not overload the compartment to the ceiling if such a layout restricts the intended air path or conflicts with the body instructions.

  6. Monitor and document conditions. Monitor the temperature according to the arrangements for the given transport and keep the required records. After unloading, verify the condition of the shipment and note any deviations so that the transport process can be assessed.

How to prepare a loading plan before the vehicle arrives

The loading plan should describe the actual shipment and the actual compartment, not just the number of pallets. The minimum set of data includes dimensions, weight, number and type of units, load height, unloading sequence, and the restrictions specified for the given vehicle. It is also worth taking into account whether the shipment contains mixed pallets, pallets with different outlines, or units that require specific access during unloading.

Plan elementWhat must be determinedWhy check it
CargoDimensions, weight, number, type of pallets and unit heightTo assess whether the layout is feasible and stable
CompartmentSupply and return path, loading line, floor, and evaporator zoneTo avoid blocking elements needed for air circulation
RouteOrder of unloading pointsTo avoid moving pallets during the operation
Transport conditionsThe required product temperature and how it is monitoredTo prepare the goods and compartment in accordance with the arrangements

The plan must be updated whenever the shipment changes. An additional pallet, a different format, greater load height, changed weight, or a new unloading order can change not only the use of space, but also access to pallets and air-flow conditions. Do not transfer a layout prepared for one compartment to another vehicle without checking its instructions.

Most common mistakes when loading a refrigerated trailer

  • Blocking the supply air, return air, or evaporator. An additional pallet may physically fit in the compartment but still block an element needed for proper circulation. The documentation for the specific body determines which space must be left free.

  • Covering the channels in the floor. Placing pallets or loose packages in a way that limits the operation of a T-floor can disrupt airflow from below. The method of using such a floor must always be checked in the vehicle instructions.

  • Pushing the load to the ceiling or to the end of the compartment. Maximum filling is not, on its own, a criterion for correctness. The load must not restrict the intended air circulation or exceed the loading line specified for the body.

  • Combining different formats without prior planning. Mixed pallets can create random recesses, shifts, and places that are difficult to secure. The layout should be mapped as a whole rather than filling empty spaces during work.

  • Assuming the unit will correct a loading error. The refrigeration system does not replace properly prepared product, a clear air path, or temperature control. Incorrectly placed cargo requires correction before departure.

  • No re-evaluation after a change in the plan. A change in the number, dimensions, weight, or order of pallets means the previous layout is no longer automatically valid. The flow, stability, access, and method of securing the load must be checked again.

Final check before closing the refrigerated trailer

The final check should compare the plan with the actual loading, rather than being limited to checking whether the doors can be closed. Before departure, confirm:

  • the openness of the supply and return air zones and the absence of evaporator blockage;
  • the conformity of the pallet arrangement with the loading line and the rules for using the ventilated floor;
  • the stability of the units and the possibility of properly securing them;
  • the conformity of the actual layout with the approved plan and unloading sequence;
  • the preparation of the goods and compartment for the agreed transport conditions;
  • activation of temperature monitoring and recording of any significant deviations.

In refrigerated transport, proper loading is part of transport-condition control. When the layout differs from the plan, it should be assessed before closing the compartment - especially in terms of air-flow continuity, load stability, and the requirements of the specific body.

Pallet3D can help prepare a visual plan for pallet placement before loading, which should then be compared with the restrictions of the specific vehicle and the transport requirements.

Plan your load in 3D

Enter your box sizes and Pallet3D shows the optimal layout in interactive 3D - 5 days free.

Open the calculator →